Galvanised Shelf Bracket of 330 x 500 mm with Brace - Per Piece

Are you looking for an elegant yet very strong shelf bracket? This galvanized shelf bracket 330 x 500 mm features a brace, providing extra stability and load capacity. The short side (330 mm) is mounted to the wall, while the long side (500 mm) sturdily supports your shelf. Thanks to the zinc coating, the shelf bracket is well protected against flash rust and is therefore suitable for outdoor use as well. The steel is 3 cm wide and 4 mm thick.

The long side is 50 cm and has 3 screw holes. The mounting holes have a diameter of 7 mm. This side is intended for screwing on the boards. You can do this with our galvanised Pozi drive chipboard screws 4 mm thick, or our Galvanised carriage bolts m6.

Mounting a 33 x 50 cm Shelf Bracket

The short side is 33 cm long and can be attached to the wall. To do this, combine our nylon plug 8x40 mm with our chipboard screw Galvanised Pozi drive 5x50 mm. The short side also has 3 mounting holes with a diameter of 9 mm. First, you drill a hole in the wall that's 5 cm deep with our hammer drill 8x110 mm. Then place the plug in the hole and screw the shelf brackets firmly on tight.

Buying your Galvanised Shelf Bracket of 330 x 500 mm

You can order the shelf brackets with braces easily and quickly at Wovar. Your supplier for Galvanised shelf brackets. Construction contractors register here for a business account. Business account holders benefit from additional benefits such as discounts.

Is this Galvanised shelf bracket not quite what you are looking for? Then take a look at our entire range of shelf brackets. Wovar also supplies white shelf brackets, aluminium shelf brackets, industrial shelf brackets, black metal shelf brackets, leather shelf brackets, and floating shelf brackets.